Foxconn 915G7MC - Page 36

Chapter 3 BIOS Description
29
System Memory Frequency (Default: Auto)
This option is used to set system memory frequency.
CPU Clock Ratio (Default: Depend on CPU )
This option is used to set the ratio of an unlocked CPU.
Auto Detect PCI Clk (Default: Enabled)
This option is used to set whether the clock of an unused PCI slot will be
disabled to reduce electromagnetic interference.
Spread Spectrum (Default: Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
CPU Clock (Default: Depend on CPU)
This option is used to set CPU clock.
PCI Express Clock (Default: 100)
This option is used to set PCI Express clock.
PCI Bus Clock (Default: 33.33Mhz)
This option is used to set PCI Bus clock.
CPU Voltage Regulator (Default: Default)
The option is used to set the CPU voltage.
Memory Voltage (Default: Default)
This option is used to adjust memory voltage.
System Core Voltage (Default: Default) (optional)
This option is used to adjust system core voltage.
SuperSpeed Menu