Foxconn H81MXV Series - Page 37

return to previous state when the STR function wakes.
►ResumeByOnboardLAN
This item is used to enable or disable the onboard LAN to generate a wake up.
►ResumeByPCIE-PME
This item is used to enable or disable the PCI Express device to generate a wake up.
►ResumeByAlarm
This item is used to enable or disable RTC alarm event to generate a wake up.
RTC is system real time clock.
►RTCAlarmDate(Days)
WhenResumebyRTCisenabled,selectaspecicdatetogenerateawakeup.
►RTCAlarmTime(HH:MM:SS)
WhenResumebyRTCisenabled,selectaspecictimetogenerateawakeup.
►RestoreonACPowerLoss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.
►PoweronByPS2Keyboard
 ThisitemisusedtoenableordisablethePS2keyboardtogenerateawakeup.
BIOS SETUP
30