Foxconn P43A Series User Manual

27
3
Central Control Unit
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
► O.C./O.V. Conguration
Press <Enter> to go to its submenu.
System Status Power LED Status Stop Blinking Condition
Normal Always On Always On
No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK
No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip
No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Central Control Unit
Smart Power LED Help Item
► O.C. Conguration [Press Enter]
► O.V. Conguration [Press Enter]
Disabled
Enabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
Options
[Disabled]

Foxconn P43A Series Specifications

General

Brand	Foxconn
Model	P43A Series
Category	Motherboard
Language	English