24
• BMS
BMS-485: Connect the generator and start-up it.
BMS-CANL: External debug.
PIN 1 2 3 4 5 6 7 8
Definition
GND GND BMS-485B BMS-CANL BMS-CANH BMS-CANH BMS-CANL BMS-485A
Model Socket asserted by shorting pins Function
ESTOP 7 8 Emergency stop the inverter.
Connection steps:
Step 1: Open the lid cover.
Step 2: Prepare a standard network cable and cable connector, then insert the network cable through the
cable connector.
Step 3: Crimp the cable with a Rj45 plug which is inside of the cable connector.
To Next Page
