44
10. Decommissioning
10.1 Dismantling the Inverter
-
Disconnect the inverter from DC Input and AC output. Wait for 5 minutes for the inverter to fully
de-energize.
-
Disconnect communication and optional connection wirings. Remove the inverter from the bracket.
-
Remove the bracket if necessary.
10.2 Packaging
If possible, please pack the inverter with the original packaging. If it is no longer available, you can also
use an equivalent box that meets the following requirements.
-
Suitable for loads more than 30 kg.
-
Contains a handle.
-
Can be fully closed.
10.3 Storage and Transportation
Store the inverter in dry place where ambient temperatures are always between -40°C - + 70°C.Take
care of the inverter during the storage and transportation; keep less than 4 cartons in one stack. When
the inverter or other related components need to be disposed of, please ensure it is carried out according
to local waste handling regulations. Please be sure to deliver any inverter that needs to be disposed from
sites that are appropriate for the disposal in accordance with local regulations.
To Next Page
Loading...
