FoxESS KH10 - Dimensions

5
- LED status indications.
- LCD display technical data, human-machine interaction through four touch keys.
- PC remote control.
•
Work modes:
Work modes
Description
Self-use
(with PV Power)
Priority: load>battery>grid
The energy produced by the PV system is used to optimize
self-consumption. The excess energy is used to charge the batteries,
then exported to gird.
Self-use
(without PV Power)
When no PV supplied, battery will discharge for local loads firstly, and
grid will supply power when the battery capacity is not enough.
Feed in priority
Priority: load>grid>battery
In the case of the external generator, the power generated will be used
to supply the local loads firstly, then export to the public grid. The
redundant power will charge the battery.
EPS mode
When the grid is off, system will supply emergency power from PV or
battery to supply the home loads (Battery is necessary in EPS mode).
Note：Charging time is when the battery is charged within the set time range. The setting of charging time
can be used in the above three modes.
3.2 Dimensions