Foxtech S-RTK100 - Clean & Maintenance; Storage

To Previous Page

Clean & Maintenance

①Using soft brush to sweep off dust or dirt on the surface of S-RTK100;

②Using a spray bottle with 30% alcohol content to softly wet a non-woven

fabric ( microfiber cloth is better but don't use tissues), and then clean the S-

RTK100 body gently to remove

liquid or other stains.

③ Please use lint-free cloth (no cotton swab) to clean the corner or interfaces,

NOTE

● Do not spray directly onto the device.

Storage

NOTE

● S-RTK100 is sophisticated electronic equipment, so please notice the

following requirements when store:

①Away from magnetic field;

②Do not drop;

③Do not squeeze;

④Away from damp environment.

Please store S-RTK100 or other electronic equipment in safe and dry

environment where there is no sunlight when it is not going to be used for an

extended period. The suggested storage temperature is 5~28℃.

S-RTK100 User Manual