Notice
Requirements Of The Power Bank
①Support 20V Output;
②Output Power is higher than 40W;
③It is recommended to use the original wire for power supply.
Notice
Please insert the 4G-NanoSIM card and the TF card into S-RTK100
before use.
Bluetooth Connection
The bluetooth of the phone should be on before connecting with S-RTk100.
After opening SLAM GO APP, connect with SLAM100 and enter standby page.
Enter SETTING>GENERAL SETTINGS>S-RTK100 SETTING and select the right
S-RTK100 bluetooth on the pop-up window to connect.
S-RTK100 Bluetooth Connection
©2022 FOXTECH All Rights Reserved 11
To Next Page
Loading...