1. Camera-Conditions
Picture
Brightness / Contrast / Saturation / Chroma CNT / Sharpness /
Sharpness CNT / Gamma
User can adjust the image parameters according to requirement.
2D NR / 3D NR
Used to suppress noise. The higher the noise reduction grade, the
fewer the noises, yet the worse the image.
Exposure
Mode
Auto: The camera automatically adjusts exposure parameters
according to environment to make sure the overall brightness of the
image in normal range.
Aperture priority: The aperture is xed. The camera adjusts shutter
speed and gain according to environment to make sure the optimal
overall brightness of the image.
Shutter priority: The shutter speed is xed. The camera adjusts
aperture and gain according to environment to make sure the optimal
overall brightness of the image.
Gain priority: The gain is xed. The camera adjusts aperture and
shutter speed according to environment to make sure the optimal
overall brightness of the image.
Manual: Adjust aperture, shutter and gain of the camera manually.
Exposure Comp
Set the compensation of the exposure.
AE recovery
Auto exposure will be recovered after the recovery time while the
camera is set as non-automatic exposure mode.
Backlight
Set backlight to improve the adaptability of the camera in complex
illuminant, which supports BLC (Backlight Compensation), HLC
(Highlight Compensation) and WDR (Wide Dynamic Range).
WB (White Balance)
The D-80
Pro
provides multiple WB modes to adapt dierent
applications.
Zoom / Focus
Digital Zoom
Enable / disable digital zoom
© 2023 FOXTECH All Rights Reserved 5
To Next Page
Loading...
Need help?
General
