Zoom Speed
The large the zoom speed is, the faster the zoom is.
Mode
Manual: The camera does not focus unless is triggered manually.
Auto: The camera automatically focuses while zooming, switching
ICR or detects scene variation.
Semi Auto: The camera automatically focuses while zooming or
switching ICR.
Fast Semi Auto / Fast Auto: Similar to Semi Auto / Auto but faster.
Far Limit
The camera only focuses on objects farther the limit. The camera
chooses optimal limit while the far limit is set as auto.
Sensitivity
Congure sensitivity to adjust the smoothness and anti-jamming
of the focus. The lower sensitivity, the smoother. The higher
sensitivity, the stronger anti-jamming.
AF Tracking
Enable AF tracking to get a better image while zooming. Disable AF
tracking to improve focus speed.
Lens Init
Click to initialize the lens of the camera, which calibrates the zooming
and focusing.
Defog
Enable defog to get a clearer image blurred by smog, vapor or dust.
The intensity of defog can be set manually or automatically.
2. Camera - Encode Setting
Video
Set main / sub stream parameters or enable / disable sub stream in
this page.
Video Codec: Set the encode mode of the video, which supports
H.264, H.264H, H.264B, H.265 and MJPEG.
Resolution: 3840x2160, 1920x1080, 1280x1024, 1280x960 or 1280x720
Frame Rate (FPS): 1~30 fps
Bit Rate Type: CBR (Constant Bit Rate) or VBR (Variable Bit Rate).
The image quality can only be set in VBR mode.
The bit rate type can only be set as CBR in MJPEG encode mode.
© 2023 FOXTECH All Rights Reserved 6
To Next Page
Loading...
Need help?
General
