Foxtech SYK-10L 4K User Manual

Bit Rate / Max Bit Rate: Bit rate in CBR mode. Max bit rate in VBR mode.
I Frame Interval: Quantity of P frame between adjacent two I Frames,
which varies with frame rate. It is recommended as two times of frame
rate.
Watermark Settings: Check to enable watermark. The watermark,
which is 128 characters at maximum, can only be made up of
numbers, letters, underscores and hyphens.
Overlay
Channel Title
Set channel title displayed on live view. User can adjust the position of
the title by dragging it on preview.
Time Title.
Set time title displayed on live view. User can enable / disable week
display and adjust the position of the title by dragging it on preview.
OSD Info
Set preset point, gimbal coordinates and zoom rate displayed on live
view. User can adjust the positions of the information by dragging
them on preview.
Text Overlay
Set text and its alignment displayed on live view. User can adjust the
positions of the information by dragging them on preview.
Font Size
Set the font size of the overlay information.
Picture
Set the uploaded picture displayed on live view. User can adjust the
positions of the picture by dragging it on preview.
OSD Warning
Set if the waring is displayed on live view. User can adjust the
positions of the warning by dragging it on preview.
GPS Position
Set if the GNSS coordinates are displayed on live view. User can adjust
the positions of the coordinates by dragging it on preview.
3. Network - General
TCP/IP
Host Name: Set the name of current camera, no longer than 15 characters.
The text overlay and picture overlay cannot be enabled at the same time.
SYK-10L 4K User Manual
© 2023 FOXTECH All Rights Reserved 7

Foxtech SYK-10L 4K Specifications

General

Brand	Foxtech
Model	SYK-10L 4K
Category	Digital Camera
Language	English