Foxwell ET2707 User Manual

QUICK START GUIDE
This Foxwell Code Reader is designed for analysing engine issues on OBDII compatible vehicles, including both
petrol & diesel. Suitable for both DIY / professional use, this code reader will read / clear OBDII codes and turn off
the check engine light. It also displays a range of live data / freeze frame data on a 2.4" TFT colour screen, along
with hot keys for an I/M readiness test. This code reader comes with lifetime free updates.
Please note that this code reader will only work on OBDII compliant vehicles. You will need to refer to your vehicle
manual, or use this QR code to reference our list of Australian OBDII compliant vehicles. For pre OBDII vehicles,
you will require a scan tool such as the ET2530.
OBDII / EOBD Code Reader
Available Functions
● Read Codes / ● Freeze Frame Data
● Erase Codes / ● Live Data
● I/M Readiness / ● O2 Sensor Test
● On-board Monitor Test / ● Component Test
● Vehicle Information / ● Modules Present
● Unit of measure / ● DTC GUIDE
Pictures illustrated here are for reference only and this Quick Start Guide is subject to change without prior notice. For more detailed instructions, please refer to the User's Manual.
Code Reader Descriptions
A OBDII Cable
B LCD Display
C Green LED Display - indicates the engine system is
working normally (all monitors on the vehicles are active
and performing their diagnostic testing), and no DTCs
are found.
D Yellow LED Display - shows the tool has found a
possible problem. Pending DTCs exist and / or some of
the vehicle’s emission monitors have not completed
their diagnostic testing.
E Red LED Display - indicates there are problems in
one or more of the vehicle’s systems. In this case, the
MIL lamp on the instrument panel will also be on.
F One Click I/M Readiness Key - quick checks the
emissions readiness state and drive cycle verification.
G UP Key
H BACK Key
I ENTER Key
J DOWN Key
K USB Port
A
B
C
H I
J
K
D
E
F
G
QUICK START GUIDE

Foxwell ET2707 Specifications

General

Brand	Foxwell
Model	ET2707
Category	Diagnostic Equipment
Language	English

Summary

Code Reader Visual Guide

Key Components

Identifies and describes the main parts of the code reader, including buttons and display.

How to Use This Code Reader

OBDII Connector and Pinout

Details the pin configuration of the OBDII connector for reference.

Retrieve I/M Readiness Status

Explains how to check vehicle's emissions readiness status.

Updating the Code Reader

Guide to updating the code reader software for latest features.

One-Year Limited Warranty

Warranty Terms and Conditions

Outlines the conditions and procedures for warranty claims and service.

Safety Information

Safety Message Conventions Used

Explains signal words used to indicate hazard levels and prevent injury.

Important Safety Instructions

Provides critical instructions for safe operation and handling of the device.

Using This Manual

Manual Conventions

Explains conventions like bold text, icons, notes, and important messages used in the manual.

Introduction

Code Reader Descriptions

Illustrates external features, ports, and connectors of the code reader.

Accessory Descriptions

Lists and describes the accessories included with the code reader.

Technical Specifications

Details display, temperature, power, protocols, dimensions, and weight.

Getting Started

Providing Power to Code Reader

Explains how to power the code reader via vehicle or USB.

Application Overview

Introduces the main applications and home screen layout of the code reader.

OBDII/EOBD Operations

Read Codes

Accesses stored and pending diagnostic trouble codes.

Erase Codes

Clears diagnostic trouble codes and temporary ECU information.

Live Data

Displays real-time PID data from the vehicle's electronic control module.

View Freeze Frame

Captures snapshot of vehicle operating conditions at time of DTC set.

I/M Readiness Status

Checks the status of emission system monitors.

Vehicle Information

Retrieves vehicle VIN, calibration IDs, and other identification data.

Unit of Measure

Allows selection between US customary or metric units.

System Setup

Select Language

Allows selection of the system language for the code reader.

Configure Monitors

Configures monitors for spark ignition and compression ignition vehicles.

Unit of Measure

Choose between US customary or metric units of measure.

Key Beep Set

Turns on or off the built-in speaker for key presses.

Diag Beep Set

Turns on or off the built-in speaker for diagnostic operations.

Tool Self-test

Checks the functionality of the LCD display, keypad, and LEDs.

Tool Information

View Reader Information

Displays serial number, software version, and other details of the code reader.

NT Wonder Introduction

Updating the Code Reader

Instructions for updating the ET2707 code reader with the NT Wonder tool.

Searching DTC

Allows looking up Diagnostic Trouble Codes (DTCs) using the NT Wonder tool.

User Manual Access

Provides access to the full user manual in PDF format via NT Wonder.

Update Tool Settings

Configures language, style, and auto-update checks for the NT Wonder tool.