23
ET2707 OBDII/EOBD Code Reader User’s Guide_English
Version_V1.00
3. Use the RIGHT key to select or deselect a monitor or press the LEFT key to deselect all the
monitors. Press the ENTER key to confirm and BACK key to cancel.
Figure5-7 Sample Spark IGN Required Monitors Selection Screen
The number to the upper right corner of display indicates the total number of optional monitors
and sequence of currently selected monitor.
5.2.2 Compression IGN Required Monitors
In this menu, the operators can configure monitors for compression ignition cars (diesel engines).
To configure spark compression required monitors:
1. Use the UP/DOWN key to highlight Compression IGN Required Monitors from the menu and
press the ENTER key to confirm.
Figure 5-8 Sample Configure Monitors Display
2. The custom monitors selection screen displays and Use the RIGHT key to select or deselect a
monitor or press the LEFT key to deselect all the monitors. Press the ENTER key to confirm and
To Next Page
Loading...
