Foxwell ET2707 - Diag Beep Set

27
ET2707 OBDII/EOBD Code Reader User’s Guide_English
Version_V1.00
Figure 5-17 Sample Beep Set Selection Screen
5.5 Diag Beep Set
Key beep set opens a dialog box that allows you to turn on/off the built-in speaker when
performing diagnostics.
To set the diag beep:
1. Use the UP/DOWN key to highlight Diag Beep Set from Setup menu and press the ENTER
key.
Figure 5-18 Sample Setup Screen
2. Press the UP/DOWN key to select an item and press the ENTER key to save and return.
Figure 5-19 Sample Diag Beep Selection Screen