12
Next Generation Diagnostic Platform GT60 User's Manual V1.01
Figure 2-2 Top View
3
Diagnostic Port -provides connection between vehicle and the scanner.
4
USB Type-C Port - connects to wall plug to charge the scanner and can
be used for data transfer.
5
USB Port - provides a USB connection for the external storage devices,
oscilloscope or video scope etc.
6
Power Switch - turns on the scanner, goes to sleep mode or wake up
the scanner from sleep mode, press and hold for 3 seconds for
emergency shutdown.
Figure 2-3 Back View
7
Rear-Facing Camera - takes pictures of VIN number, faulty parts and
plates and shoots test videos.
IMPORTANT
Do not use solvents such as alcohol to clean display. Use a mild nonabrasive
detergent and a soft cotton cloth.
To Next Page
Loading...
