Foxwell NT204 - 5 System Setup; Language Selection

NT204 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
20
5 System Setup
This section illustrates how to program the code reader to meet your specific needs.
When Setup application is selected, a menu with available service options displays. Menu options
typically include:
● Language
● Configure monitors
● Unit of measure
● Key Beep Set
● Diag Beep Set
● Tool self-test
5.1 Select Language
Selecting Language opens a screen that allows you to choose system language.
To configure system language:
1. Use the LEFT/RIGHT key to highlight Setup from home screen and press the ENTER key.
Figure 5-1 Sample Home Screen
2.A screen of a list of menu options displays.
Figure 5-2 Sample Setup Screen
3.Press the UP/DOWN key select a language and press the ENTER key to confirm. Press the
BACK key to exit and return.