Foxwell NT204 - Key Beep Settings

NT204 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
26
Figure 5-14 Sample Setup Screen
2.Press the UP/DOWN arrow key select an item and press the ENTER key to save and return.
Figure 5-15 Sample Unit Selection Screen
5.4 Key Beep Set
Key beep set opens a dialog box that allows you to turn on/off the built-in speaker for key
pressing.
To set the key beep:
1. Use the UP/DOWN key to highlight Key beep set from Setup menu and press the ENTER key.
Figure 5-16 Sample Setup Screen
2. Press the UP/DOWN arrow key select an item and press the ENTER key to save and return.