Foxwell NT204 - Spark Ign Required Monitors

NT204 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
22
To configure monitors:
1. Use the UP/DOWN key to highlight Configure Monitors from Setup menu and press the
ENTER key to confirm.
Figure 5-4 Sample Setup Screen
2. A screen with the optional monitors to be configured displays.
Figure 5-5 Sample Configure Monitors Display
5.2.1 Spark IGN Required Monitors
In this menu, the operators can configure monitors for spark ignition cars (gasoline engines).
To configure spark IGN required monitors:
1. Use the UP/DOWN key to highlight Spark IGN Required Monitors from menu and press the
ENTER key to confirm.
2. The custom monitors selection screen displays.
Figure 5-6 Sample Custom Monitors Selection Screen