12
Smart Diagnostic & TPMS Scanner TS7000 User's Manual V1.0
1
7” TFT LCD Touch Screen- shows menus, test results and operation
tips.
2 Power Status Indicator - indicates the power status of the scanner.
The red light indicates that is charging or the battery is low, and the
green light indicates that it is fully charged or has electricity.
Figure 2-2 Top View
3 TPMS Trigger - shows the location of the signal transmitter such as tire
pressure activation and programming.
4
Power Switch - turns on the scanner, goes to sleep mode or wake up
the scanner from sleep mode. Press and hold for 3 seconds for start or
emergency shutdown. Double click to screenshot.
5
USB Type-C Port - connects to wall plug to charge the scanner and can
be used for data transfer.
Figure 2-3 Back View
6
Rear-Facing Camera - takes pictures of VIN number, faulty parts and
plates and shoots test videos.
7
Speaker – outputs audio.
To Next Page
Loading...
