39
Smart Diagnostic & TPMS Scanner TS7000 User's Manual V1.0
3. After the download is completed, it will automatically jump to the Firmware
Update function module.
4. Check the battery level to ensure that the battery level should be greater
than 20%.
5. It will start update automatically if there is an update available. If update
failed, please follow the on-screen instructions to troubleshoot and repeat
the update.
Figure 8-2 Sample Firmware Update Screen
6. “VCI firmware successfully message” will appear if update successfully.
NOTE
If there is a firmware update available, the update file will be downloaded
and saved automatically when you try to update the diagnostic software. And
you will be prompted to upgrade the firmware.
9 Diagnosis
This section illustrates how to use the scanner to read and clear diagnostic
trouble codes, view live data readings and ECU information on controllers
installed, perform special functions such as actuation and coding, and
perform vehicle services and maintenance on Asia, European, China and
USA vehicle brands.
To Next Page
Loading...
