67
Smart Diagnostic & TPMS Scanner TS7000 User's Manual V1.0
Sensor activated
successful
TPMS sensor is successfully activated and decoded. The table on
the right side of the screen displays the sensor information.
If the search period expires and no sensor is activated or decoded,
the sensor may be mounted incorrectly or cannot function. The table
on the right side of the screen displays “Failed”.
If as sensor with a duplicate ID has been read, the screen displays a
message “Sensor ID duplicated”.
In the case, repeat the test procedure.
Table 11-1 Possible results for triggering
11.2 Programming Operations
The programming function is used to program the sensor data to the Foxwell
sensor T10 and replace the faulty senor (poor battery life or malfunction).
The TS7000 is easy to use with a proven efficiency and guaranteed accurate
results.
There are four options available when programming Foxwell sensor T10
using the Display Tablet: Manual Create, Clone by Activation, Automatic
Create (1-16), Clone by OBD.
Figure 11-8 Sample Programming Function Screen
Main Section
Column 1 – displays wheel positions
To Next Page
Loading...
