PostBase Vision
20
Load postage / Contact data centre
In order to frank, the PostBase Vision must
have corresponding postage credit. This re-
quires contact with the data centre.
• Follow the instructions on the display.
Home screen (example) Installation complete
When PostBase Vision displays the Home
screen, the franking machine installation has
been successfully completed.
To install the “PostBase Vision Feeder”, con-
tinue with Step 7.
The M
ENU button is used to access other
system settings (e.g. PIN protection, standby
time).
Volume, display inclination and brightness
can be adjusted directly on the display frame.
To Next Page
Loading...
