IL-C-DRW-A001/A003 - 13 - © Future Products Group
CLEANING
Cautions
REFRIGERATED CABINETS
-
CLEANING
ALWAYS TURN THE POWER SUPPLY OFF BEFORE CLEANING.
THIS UNIT IS NOT WATERPROOF. DO NOT USE A WATER JET SPRAY TO
CLEAN THE INTERIOR OR EXTERIOR OF THIS CABINET.
Exterior
REFRIGERATED CABINETS
-
CLEANING
Plastic and
Metal Surfaces
Plastic or stainless steel surfaces should be cleaned with hot soapy water or a
good quality glass cleaner.
DO NOT clean surfaces with abrasive pads or cleaners as surfaces will be
damaged.
With the drawer fully open, vacuum or brush away any debris in the runners,
located on each side.
Use a vacuum cleaner to remove dust and fluff from
the ventilation louvers.
This will maintain the refrigeration efficiency, and
prevent overheating.
The pre-filter should be removed and cleaned
regularly.
Hinge down the front panel to lift out the filter.
Knock off loose dirt and wash the filter in warm
soapy water, as required.
To Next Page
Loading...