FPG IL-C-DRW-A003 - Control Panels and Temperature; Preparation and Loading

IL-C-DRW-A001/A003 - 9 - © Future Products Group
Controls
REFRIGERATED CABINETS - OPERATION
Control Panels
The control on the front of the cabinet is fitted with:
• A mains Power Switch
• A refrigeration controller
Temperature
Controller
Only to be
adjusted by a
qualified service
technician.
The controller regulates the cabinet temperature
and controls the automatic defrost cycles.
The display indicates the temperature of the
returned air, entering the cooling coil, which will be
very close to the internal temperature of the cabinet.
The refrigeration gas pressure is also monitored, to protect the compressor from
damage resulting from a blocked radiator or loss of gas.
Preparation
REFRIGERATED CABINETS - OPERATION
Load the
Drawer
Pull the drawer forward to load it with pre-chilled
containers of milk, and other products.
Place a selection of products in the easy-access
flap section.
The cabinet is designed to maintain the
temperature of pre-chilled product at between 2
and 4C.
It is not a refrigerator, and consequently, if
warm product is introduced, there could be a
considerable delay before the temperature falls
to the normal operating level.
Continued on next page