27
ENGLISH
Drain the water from the fuel filter
In the case of a high risk of refuelling with fuel polluted with foreign
agents and water, the following check should be performed at each
refuelling.
Only proceed when the engine is not turning over.
Place a container for collecting liquids under the fuel filter.
Unscrew the valve plug (1) located at the bottom of the filter; in
some versions, the plug includes the water in diesel sensor.
Drain the liquid until only “diesel” is released.
Fully retighten the plug manually.
Dispose of the drained liquids according to the applicable
regulations in force.
Do not fill the new fuel filter before placing it on the
support in order to prevent harmful impurities from
entering the fuel circuit and the injection system.
Eliminate the consumables and any materials in
contact with them (for example, filters) in accordance
with current regulations.
The FPT Technical Service Network workshops are
equipped for this purpose.
To Next Page
Loading...
