13
Setting dehumidifying mode
At setting dehumidifying mode, the unit can be adjusted in arrange 35%~85%, and the humidity setting can
be adjusted(increase/decreasing) in 5%. Press MODE button to exit setting dehumidifying mode.
Dryer mode
The unit can make the MAX dehumidification function when it is under Dryer mode. The fan speed can’t be
adjusted.
Note:
1. The dryer (model dependent) mode must be operated in a close room, do not open the door and window.
2. To make the best effective dehumidification, please first dehydrate the wet clothes.
3. Make sure to direct airflow at the wet clothes.
4. For thick and heavy wet clothes may not get the best effective dehumidification.
Filter/HEPA light
The check filter feature is a reminder to clean the Air Filter for more efficient operation. The Filter light (HEPA
light) will flicker after 250 hours of operation. To reset after cleaning the filter, press the Fan button for 3
seconds and the light will go off.
To Next Page
Loading...