FRAME IT ALL Stack & Extend VEGGIE WALL User Manual

VEGGIE WALL
Stack &
**
Extend
- Used with *curved raised bed
Customer Service: 1800-914-9835 | support@frameitall.com
© Frame It All. All Rights Reserved.
KIT CONTAINS:
Stake
x 3
Adapter Caps
x 3
Cotter Pin x 2
L Connector
x 2
Cap x 3
Lower
Tube
x 3
Upper
Tube x 3
Middle
Tube
x 3
Net x 1
T Connector
x 3
2
1 3
4 5
6
7
8
9
10
Long Tube x 2
Cross Brace x 1
Tie
x 28
11
12
13
**Use Stake
if you install
veggie wall
directly in the
ground
300001252-C
*RAISED BED
NOT INCLUDED
Sold Separately
Each kit will include 2 x 4’
curved panels, frame,
netting and all connectors
**Extendable – combine 2 kits
to expand to any dimension,
requires 2 kits of more

FRAME IT ALL Stack & Extend VEGGIE WALL Specifications

General

Brand	FRAME IT ALL
Model	Stack & Extend VEGGIE WALL
Category	Lawn and Garden Equipment
Language	English

Summary

Veggie Wall Product Information

Kit Contents Overview

Lists all components included in the Veggie Wall kit for assembly.

Product Features and Expandability

Describes the Veggie Wall's functionality, use with raised beds, and expandability.

Veggie Wall Assembly Instructions

Step 1: Assembling Upright Poles

Detailed steps for constructing the three main vertical support poles.

Step 2: Connecting Horizontal Frame and Brace

Instructions for assembling the top horizontal frame and attaching the cross brace.

Step 3: Securing Frame to Vertical Poles

Guidance on placing the assembled frame onto the poles and using stakes.

Step 4: Attaching the Netting

Steps for correctly affixing the green netting to the frame using cable ties.

Optional: Expanding the Veggie Wall

Instructions for connecting a second Veggie Wall unit for larger dimensions.