Customer Service: 1800-914-9835 | support@frameitall.com
ASSEMBLY INSTRUCTIONS – continued
STEP 4: Attach rest of framework to gate frame
STEP 5: APPLY NETTING
Apply the netting to both the vertical and horizontal tubes of the gates and
main frame using zip ties. Attach the top of the netting flush with the upper
tubes so the netting hangs over your raised bed.
SECOND: Slide three round
tubes (19) into the
connectors to create the
remaining upper edges of
the animal barrier.
FIRST: Use connectors
(2, 1 & 13) to form the
joints for each of the
back corners at the top
of the animal barrier.
Then, place a round tube
(20) into the bracket of
the raised bed and slip a
joint assembly onto this
vertical tube. (See
diagram in box)
To Next Page
Loading...
