May99/JEB
Page 2 of 16
INSTRUCTION FOR
MAINTENANCE AND REPAIR
FRAMO CARGO PUMP SD100-5
Rev.: A
CONTENTS
Reference to associated instructions:
1.0 Sectional drawing of pump unit
1375-0027-4 Service manual STC-valve
1.1 Technical data
0290-0036-4 Installation of mechanical oil seal
0032-0357-4 Standard tool
2.0 Maintenance instruction
0032-0436-4 Special tool
2.1 Dismantling of impeller/ wear rings
0032-0437-4 Special tool, splitted pump
2.2 Dismantling of lip seal arrangement
2.3 Dismantling of mechanical oil seal
and hydraulic motor
2.4 Assembling sequence
2.5 Pressure test of pump
1.0 SECTIONAL DRAWING
Fig. 01
To Next Page
Loading...