14
Operating instructions
Parquet floor sander COBRA C
with gentle lifting lever
7 Operating the COBRA C
7.1 Protective clothing and equipment
Caution! Wear hearing protectors!
The supplied hearing protectors must be worn when using the machine.
The following sound level values have been measured for the parquet floor sander COBRA C
according to DIN 45 645:
Idle mode LEQ = 85 dB(A)
Working mode LEQ = 87 dB(A)
The noise produced when the machine is working depends on various factors. Local
conditions such as room size and quality of the floor affect noise development.
Caution! Wear a respirator!
When using the parquet floor sander COBRA C and when disposing of the sanding
dust, always wear a respirator (see chapter 7.3 and 7.4). Wear the respirator which is
supplied with the accessories.
Caution! Wear safety goggles!
When using the parquet floor sander COBRA C and when working on COBRA C,
always wear safety goggles to protect your eyes.
Caution! Wear proper working clothing!
When using the parquet floor sander COBRA C and when working on COBRA C, never
wear loose clothing. This can get caught up in moving parts.
To Next Page