Remove and Clean Refrigerated Drawers (continued)
Document Part #19011151 – Rev. C – Revised 5/23/2018 ©McDonald’s Corporation · Planned Maintenance Manual · Revised January 2007 Page 3 of 3
Foodservice Solutions Convertible Cooler Freezer
RF19
Reinstall and close the drawer
Gently set the drawer rails
back onto the rollers on the
end of the drawer sliders.
Push the drawer in until
completely closed.
Reopen the drawer and push
the drawer lock upward and
towards the back of the
drawer to lock the drawer in
place.
After allowing the equipment
to dry, plug the equipment
into the electrical outlet and
flip the rocker switch to the
ON position. Allow the
drawers to reach operating
temperature before reloading
with wares and product.
To Next Page
Loading...
Need help?
General
