Franke A300 - Page 4

Cleaning instructions A300
4 Franke Kaffeemaschinen AG
Clean the drip tray and drip grid.
NOTICE
Escaping liquid
Applies to machines with a wastewater connection! On machines with a wastewater connection, if water
remains in the drip tray, this can escape when the drip tray is removed.
a) Before removing the drip tray, ensure that the remaining water has drained.
3
2
1
4
1. Clean the drip tray [1], the drip tray lid [2] and
the drip grid [3] using the 5-step method.
2. Thoroughly clean the projecting features on
the underside [4] of the drip tray lid [2].
The rear of the drip tray [1] must be clean and dry, both inside and out. If it is not, this may cause the drip
tray's continuous level sensor to issue an alert in error.
1
2
If the coffee machine is connected to the wastewater system, there are two O-rings on the back of the drip
tray [2]. These must be moistened with water so that the drip tray can fully engage. Otherwise, the capaci-
tive sensor cannot detect the drip tray.
Cleaning the screen
1. Tap the Settings symbol at the top left.
2. Select Cleaning and Maintenance.
3. Select Wipe protection.
ð The user interface is locked for 20 sec-
onds.
4. Clean the surface with a damp cloth.