4
4
01 02
4
03
04
05 06
07
10
!
09
4
4
4 4
4
4
4
4
4
11
08
4
Care of the A800
Page 36
NOTE
Impairment of function
If the bean hopper and pow-
der container are not locked
correctly, this may impair both
the function of the co ee ma-
chine and the product quality.
• Push the locking slide all
the way in.
Cutting injuries/crushing
The powder container's con-
veyor mechanism can cause
cuts or crushing injuries.
• Exercise care when
cleaning the powder
container.
Attach the powder con-
tainer.
CAUTION
Clean the powder container
with a cloth. Use detergent
if necessary. Rub out the
powder container with a dry
cloth.
Close the door.
Push the locking slide all the
way in.
Lift the powder container
up.
Empty the powder con-
tainer.
Attach the bean hopper.
Rub out the bean hopper
with a dry cloth.
Lift up the bean hopper.
Empty the bean hopper.
NOTE
Soiling, formation of mildew
The bean hopper dries slowly and can continue to release mois-
ture during tting.
• Do not bring the bean hopper into direct contact with water.
• Only use a damp cloth for cleaning.
• Remove detergent residue.
Pull the locking slide all the
way to the front.
Open the door.
Cleaning the bean hopper and powder container
Clean the powder chute
with a brush.
To Next Page
