Franke FCS4053 - Page 25

i
01
4
4
05
02
4
i
03
04
4
Filling and emptying
Page 23
Set the grind coarseness with
the grinder adjustment wrench.
NOTICE
If needed, the grind coarseness
can be set in stages for each
grinder.
+2 = Very coarse
0 = Normal
-2 = Very fi ne
For notes on cleaning the bean
hopper, see Chapter «Care of
the A1000», «Cleaning the bean
hopper and powder container»
on p. 36.
Impairment of function
If the bean hopper and powder container are not locked correctly,
this may impair both the function of the coff ee machine and the
product quality.
•Push the locking slide all the way in.
Attach the bean hopper.
Push the locking slide all the
way in.
Lift and remove the bean
hopper.
Empty, clean and dry the bean
hopper.
Pull the locking slide all the way
to the front.
Emptying the bean hopper, setting the grind coarseness