Franke FIH3210 - Finish cooking; Using the Boost function

  )LQLVKFRRNLQJ

Touching the heating zone selection control that
you wish to switch off.
Turn the cooking zone off by touching the slider to
left. Make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down
to a safe temperature. It can also be used as an
energy saving function if you want to heat
further pans, use the hotplate that is still hot.
  8VLQJWKH%RRVWIXQFWLRQ
Activate the boost function
Touching the heating zone selection control

Touching the boost control , the zone indicator
show “b” and the power reach Max.
Cancel the Boost function
Touching the heating zone selection control that you
wish to cancel the boost function
