EasyManuals Logo

Franke Frames CM FS 45 BK User Manual

Franke Frames CM FS 45 BK
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
– 16 –
CM FS 45 BK
EN
Make sure the intake tube is correctly inserted in
the rubber washer.
Then replace the milk container lid.
The quantity of froth can be adjusted by moving
the regulator to CAPPUCCINO or CAFFE LATTE:
CAFFE LATTE for a denser froth;
CAPPUCCINO for a less dense froth.
Remove the hot water spout and attach the milk
container to the nozzle.
Position the milk spout (N4) and then place a
sufficiently large cup under the coffee and milk
spouts.
Press the touch key (12). CAPPUCCINO is
displayed and after a few seconds, frothed milk
flows out of the milk spout into the cup below
(delivery stops automatically).
Next the appliance delivers coffee.
The cappuccino is now ready. Sweeten to taste
and, if desired, sprinkle the froth with a little cocoa
powder.
Making Latte Macchiato
Prepare the appliance as described in ‘Making
cappucino’.
Position the froth regulator (N2) between
CAPPUCCINO and CAFFE LATTE printed on the
milk container lid.
Press the touch key (13).
Frothing milk
First, prepare the appliance as
described in ‘Making cappucino’,
step 2, 3, 4, 5 and 6.
Press the touch key (12)
or (13) twice (within two
seconds).
The quality of frothed milk
delivered is equal to that of the selected drink
(cappuccino or latte macchiato).
Notes:
While making cappuccino or latte macchiato, the
flow of frothed milk or coffee can be interrupted
by pressing the touch key (12) or the
touch key (13).
If the milk in the container finishes while
delivering frothed milk, remove the container and
add milk. Then re-attach it and press the
touch key (12) or the touch key (13) to request
cappuccino again.
To ensure the complete cleanliness and hygiene
of the milk frother, always clean the circuits in
the milk container lid after making cappuccino.
PRESS CLEAN! flashes on the display.
Place a recipient under the milk
spout.
Press the CLEAN button on the
lid (N3) and hold down for at least
5 seconds to start the cleaning
function. The appliance displays
the message CLEANING above a
progressive bar.
You should not release the CLEAN button until
the bar is complete indicating that cleaning is
concluded. When the CLEAN button is released,
the function stops.
After cleaning, remove the milk container and place
in the refrigerator. The milk should not be left out of
the refrigerator for more than 15 minutes.
To change the quantity of coffee or frothed milk
the appliance delivers automatically into the cup,
proceed as described in the section “Changing
the quantity of coffee and milk for cappuccino or
latte macchiato”.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Franke Frames CM FS 45 BK and is the answer not in the manual?

Franke Frames CM FS 45 BK Specifications

General IconGeneral
BrandFranke
ModelFrames CM FS 45 BK
CategoryCoffee Maker
LanguageEnglish

Related product manuals