!
23
Caring for the fully automatic coffee machine
Danger of scalding!
From hot water, splatters and hot steam.
Do not touch the machine below the outlets or the outlets themselves.
WARNING
Only use FRANKE cleaning tablets for cleaning.
12
Press the Rotary button to start the automatic cleaning.
11
Insert a cleaning tablet.
Close cover on right and powder chute.
09
Confirm with Rotary button.
The system is being filled.
10
Open cover on right and powder chute.
08
The cleaning process is being prepared.
08
Empty drip tray and grounds container, clean thoroughly
and reinstall.
Automatic cleaning cannot be interrupted.
Carefully carry out the instructions on the control panel.
07
Switch over to Maintenance level.
Select "Clean System".
06
Attach cover plate.
Connect milk hose to the outlet.
05
Assemble and re-install frother.
Empty trays
Please Wait
Start Cleaning
Fill up Pipe System
Cleaning Tablet in
Powdershaft
Empty trays
Please Wait
Start Cleaning
Fill up Pipe System
Cleaning Tablet in
Powdershaft
To Next Page
Loading...
