30
Configuration
Select your water temperature or set the value individually using the "Individuality"
menu item.
Temperature
Appears only if you are not using a filter.
Adjust the water hardness in accordance with the "Commissioning" chapter
Water hardness
Action Menu item Information / Instruction
Finishing the filter operation "Insert Filter Yes / No" Select "No"
Confirming the filter operation "Insert Filter Yes / No" Select "Yes". Select Filter rinse
Rinsing the filter "Filter rinse" Filter is rinsed
Replacng the filter "Filter replace" Follow instructions in chapter on care
If Yes:
Filter
Filter
Insert Filter Yes/
No
Amount Milk
Amount frothy M.
Exit
Temperature
Normal
High
Maximum
Individuality
Exit
To Next Page
Loading...
