Troubleshooting
12 Machine error codes
Error
code
Error text on the
display
Meaning Solution
120 No ground coffee
The brewing chamber was able to be closed
up to increment 1540 and is therefore reco-
gnized as being empty (only if monitoring is
programmed. See Section 6 - Programming,
V.Programming, 2. Products, 2.13 Grind
quantity/powder, Monitoring, p. 64.)
Variable: Increment value of the brewing unit
when the error occurred
` Check the coffee powder chute and
clean with a brush.
` Check the light barrier of the coffee bean
monitor.
` Add ground coffee and/or coffee beans.
` Restart product preparation.
121 Fill left container
Left container is empty. ` Fill beans or powder, respectively, into
the left container.
122 Fill center contai-
ner
Center container is empty. ` Fill beans or powder, respectively, into
the center container.
123 Fill right container
Right container is empty. ` Fill beans or powder, respectively, into
the right container.
124 Cover open
The cover of the ground coffee container is
open (applies only to Spectra X with powder
dosing unit). No coffee powder dosing is car-
ried out or an ongoing coffee powder dosing
is canceled.
` Close the cover of the ground coffee
container.
` Check whether there is ground coffee
between the ground coffee container
and the ground coffee storage container;
this causes the two containers to be
pushed away and the cover monitoring is
inhibited.
` Check solenoid switch.
` Restart product preparation.
125 Powder lid
open
The powder lid for manually filling with pow-
der or cleaning tablets is open
Variable: 24 V in [0.1 V] increments.
` Close powder lid (the brewing unit is
recalibrated afterwards).
126 Brewing chamb
open
The brewing chamber was opened during a
brewing process up to increment 1245.
The brewing process is canceled.
Variable: Increment value of the brewing unit
when the error occurred.
` Prepare a new drink (the brewing unit will
be recalibrated).
` If this occurs more than once, check the
values, see Section 6 - Programming,
V. Programming, 8. Output ports, 8.25
Brewing unit, p. 109.
127 Brewing chamb
open
The brewing chamber could not be closed
(increment 1255 was not reached).
Variable: Increment value of the brewing unit
when the error occurred
` Prepare a new drink (the brewing unit will
be recalibrated).
` Check grind quantity, see Section
6 - Programming, V.Programming, 2.
Products, 2.13 Grind quantity/powder
p. 64.
` Check grinder calibration, see Section
6 - Programming, V.Programming, 10.
Calibration, p. 126 ff.
130 Add cold milk
Foam Master: Milk must be refilled, the
ongoing product is interrupted. In accoun-
ting mode, an interrupted, previously paid
product can be dispensed one more time at
no charge.
CF, CF2: The max. time for the milk empty
message in Tank 1 has been reached. All
milk products are immediately blocked.
Variable: 24 V in [0.1 V] increments.
` Add milk.
Foam Master: If the error message appears
despite a full tank, then the following checks
are necessary:
` Check milk suction hose.
` Check the milk foam portion (max. 70%)
of all products that contain cold milk
foam.
To Next Page
Loading...
Need help?
General
