Franke SPECTRA X - 1 Machine Restart; 2 Quick Error Resolution

i
01
01
i
Troubleshooting
Document Number: TD-104406/0Order Number: 1H329021/0
Troubleshooting 17
▪ The protocols or acknowledgment of many errors can be resolved by briefly pressing
the button.
▪ For instance, the CAN bus or the display can be completely rebuilt in this way.
` Very briefly (approx. 100 milliseconds) press the CLEAN
button.
The error will be resolved and the display may rebuild.
` Switch off the machine.
` Disconnect the machine from power for at least 30 se-
conds.
The condensers will discharge.
` Switch on the machine.
▪ As a matter of course, always restart the system first.
▪ Among other things, a restart resets the CPU and the power PCB.
IV. Troubleshooting
1. Machine restart
2. Quick error resolution