STEP 1
Remove all of the components from the box and confirm you have all the parts from the parts list.
STEP 2
Unfold the fiberglass poles and slide pieces together at the joints.
STEP 3
Lay out the net and find the optic yellow nylon sleeve section with the Blackhawk logo.
This is the Top/Front of the net.
Assembly Instructions:
STEP 4
Insert both sets of fiberglass tubes into the two sleeve sections. Start at the BACK/SIDE and insert
the frame through the nylon sleeve section.
STEP 5
Once both frame pieces have been inserted through the top and bottom sleeves, use the corner
attachment to connect the front frame to the back frame.
STEP 6
Insert ground stakes through the elastic loops (2 back + 2 front) designed to help secure your
goal to the ground.
TOP OF NET
BOTTOM/BACK OF NET
Top/Front Sleeve
Side/Vertical
Sleeve
Bottom/Side
Sleeve
TOP OF NET
BOTTOM/BACK OF NET
Insert
tubes
here
To Previous Page
Loading...
