Franklin DELUXE User Manual

Return Trainer
Pitch Target
DELUXE 2 in 1
Throwing & Pitching
Combo Set
Item #2719
Step 6:
Before putting the net on the frame, secure part (2), “Infinite Adjustment” system by
screwing onto pole counter clockwise. To attach net part (11) to frame, spread out net
and find red tabs attached to net. The red tabs indicate the corners of the net. To attach
net, start with one corner and attach with one bungee, then attach the other three
corners. Next, start at the top of the frame and attach the bungees across the top
spreading them evenly. Attach the bungees on one side spreading them evenly. Repeat
on bottom and then on final side.
Step 8:
Attach target ribbon part
(12) by weaving through
net and tying off at
ends.
Step 7:
To attach bungees to net
hold plastic ball in place
and wrap free end around
net and side tube. Loop
free bungee around plastic
ball.
For Replacement Parts Call 1-800-225-8649
MA Residents Call 1-781-341-5178
FRANKLIN SPORTS INC. Stoughton, MA 02072 www.franklinsports.com
Note: Do not extend
“Infinite Angle” adjustment
system beyond red
indicator mark on tube.
TOOLS REQUIRED:
FLAT OR PHILLIPS SCREWDRIVER
Step 9:
Attach catcher target, part
(13), to bunees on other side
of return. Place bungee
hooks into metal holes
around the outside of target
screen.
Step 10:
Attach collection bag, part
(14), to clips on front of
catcher target.
Step 11:
To draw back target,
attach back straps to the
back brace pole.
ISO 4/08
Use extreme caution when assembling
the net to the frame. The bungees will
be under extreme tension and must be
attached carefully. Adult assembly is
strongly recommended.
Note: To fold flat for easy storage, depress push
pins on part (6) and release support arm. Unit
will now fold flat.

Franklin DELUXE Specifications

General

Brand	Franklin
Model	DELUXE
Category	Sports & Outdoors
Language	English

Summary

Assembly Instructions

Step 1: Make Net Frame Side

Assemble the net frame by connecting part (3) into part (4) and snapping push pins.

Step 2: Form Net Frame

Construct the rectangular net frame using U-shaped tubes and side poles.

Step 3: Assemble Base Frame

Build the base using U-shaped tubes, L-shaped tubes, and ground stakes, attaching side supports.

Step 4: Attach Net Frame to Base

Connect the net frame to the base assembly using bolts and wing nuts, then attach the adjustable system.

Step 5: Secure Adjustable System

Attach the bottom of the adjustable system (part 2) to the base by inserting part (6).

Step 6: Attach Net and Bungees

Mount the net to the frame using bungees, starting with corners and spreading evenly.

Step 7: Secure Bungees

Detail on attaching bungees to the net and side tube, wrapping the free end around the plastic ball.

Step 8: Attach Target Ribbon

Weave the target ribbon (part 12) through the net and tie it off at the ends.

Step 9: Attach Catcher Target

Connect the catcher target (part 13) to the frame using bungees, hooking into metal holes.

Step 10: Attach Collection Bag

Clip the collection bag (part 14) onto the front of the catcher target.

Step 11: Attach Back Straps

Secure the back straps to the back brace pole for the target.

Replacement Parts