71
Resetting Your Unit
If the keyboard fails to respond, or if the screen
performs erratically, perform a system reset by
following the steps below.
1. Hold CLEAR and press .
If nothing happens, try Step 2.
2. Use a paper clip to gently press the reset
button on your unit.
The reset button is recessed in a pin-
sized hole below the book card slot.
Warning! Pressing the reset button with more
than light pressure may permanently
disable your unit. In addition,
resetting the unit erases settings and
information entered in its built-in
book, and in an installed book card.
To Next Page
Loading...
