FRANKLINWH aPower X - aGate X Panel Removal; Remove the Inner Panel; Remove the Door

QUICK INSTALLATION GUIDE (FHP)
6
Remove the Inner Panel and Door from the aGate X
• Remove the Inner Panel
Use a #3X4” Phillips head screwdriver or an electric screwdriver with a Phillips head cross screw
bit. Turn the 6 combination screws fastening the inner panel counterclockwise to remove the
screws. Remove the aGate X inner panel and properly store it.
• Remove the Door
Use a #2X4” Phillips head screwdriver. Turn the 6 countersunk screws fastening the hinges on
the aGate X door counterclockwise to remove the screws. Remove the aGate X door and
properly store it.
Inner Panel
Door
Remove the screws in
the red circle from
inside