FRANKLINWH aPower X - Mount the aGate X on a Wall; Sealing Washers and Knockouts; Drilling and Dust Protection Warnings

QUICK INSTALLATION GUIDE (FHP)
7
Mount the aGate X on a Wall
DANGER:
Avoid drilling holes in the water pipes and cables buried in the wall.
WARNING:
Cover the aPower X top heat dissipation hole to protect from gravel dust
during drilling.
Based on the preplanned
installation position and electrical
conduit arrangement, the installer
may choose to remove the
knockouts or plugs in the aGate X.
Included Sealing washers
(x4) must be installed