LGT100 Rev0309
7
Operation Safety Precautions
Operate portable lighting products only from the type of power source indicated
on the identication label.
During operation use the handle to move the light, the housing will be extremely
hot.
Ensure that all lighting components are clear of obstructions when raising
telescopic poles.
Ensure that telescopic poles are lowered and stowed before moving the
vehicle.
Maintenance Safety Precautions
Ensure power is off prior to removing the front glass or opening covers.
Do not operate the light with the front glass removed or cover opened.
Ensure replacement bulbs have the same voltage and wattage.
When handling a new quartz halogen, HIR, or HID bulb avoid touching it except
on the at seal at either end.
Use a clean soft cloth to wipe the reector clean if necessary, do not use liquid
or aerosol cleaners.
To Next Page
Loading...