11
The device does not have start/stop buttons. Once installed, it is ready to be congured via App.
This allows the appropriate operating mode to be selected, depending on whether connection
to the charge point management platform is via app or in StandAlone mode, when the
following conditions are fullled:
correct installation, certied by qualied personnel
regular status of the device.
If the device is damaged, follow the instructions below precisely to hazardous situations,
potentially resulting in damage to persons or things:
avoid using the damaged device
clearly label the damaged device so other people do not use it
call a qualied professional promptly so the device can be repaired or, if irreparably
damaged, taken out of service.
To Next Page
Loading...
