Freedom R8000 Series User Manual

AutoTune for Motorola APX Series Radios User Guide
1
1. Introduction
The Freedom Communication Technologies R8000 Series Communications Systems
Analyzer AutoTune™ (hereafter “AutoTune”) is designed to provide an automated test
and alignment solution for supported two-way radios.
2. Scope
This document is intended to provide information regarding the tests and alignments
performed by AutoTune for Motorola APX portable and mobile two-way radios. This
document is restricted to radio-specific information.
Please refer to the R8000 Series Communications System Analyzer Owner’s Manual
(FCT-1365) for an overview and basic operating instructions for AutoTune itself.
2.1. Supported Models
The following Motorola APX Series radio models are supported:
• APX 900
• APX 1000/1000i
• APX 1500/1500 Enhanced
• APX 2000
• SRX 2200
• APX 2500
• APX 4000/4000Li
• APX 4500/4500Li/4500 Enhanced
• APX 6000/6000Li/6000XE/6000 Enhanced
• APX 6500/6500 Enhanced
• APX 7000/7000XE
• APX 7500
• APX 8000/8000H/8000XE
• APX 8500/8500HP
2.2. Required Options
Option Name
Reason
P25 Conventional Test Mode (R8-P25)
Used to perform P25 Tx Tests and
Sensitivity (P25 BER) tests.
P25 Phase 2 Test Mode (R8-P25_II)
Used to perform P25 Phase II Tx Tests and
Sensitivity (P25 Phase II BER) tests
Motorola APX(R8-AT_APX)
Motorola APX AutoTune, including
Enhanced (‘B’) series
Motorola APX8000 (R8-AT_APX8000)
Motorola APX 8x00 AutoTune
Table 2-1. Required R8x00 options for AutoTune for Motorola APX Series radios.

Freedom R8000 Series Specifications

General

Brand	Freedom
Model	R8000 Series
Category	Measuring Instruments
Language	English