1.Put the treadmill on a flat ground and have the
treadmill run at 3.73-5mph to check if it drifts
2.If it drifts to the right side, turn adjusting bolts on
right side 1/4 circle clockwisely, check if it drifts.
Repeat the steps above until it centers, see
picture A.
3. If it drifts to the left side, turn adjusting bolts on
left clockwisely, check if it drifts. Repeat the steps
above until it centers, see picture B.
4. The running belts will loosen in a certain
amount of time. So to solve this problem, turn
adjusting bolts on both side 1/4 circle clockwisely,
check if it drifts. Repeat the steps above until it
centers, see picture C.
To Next Page
Loading...
