ASSEMBLY STEP 4:
ASSEMBLY STEP 5:
Use the 5# Allen wrench (65) and M8*15
bolt (70) and lock washer (95), lock the
computer (A) onto the left and right upright
tube (B).
Fix the Left & Right upright tube
covers(23,24) to the base frame（A） by
using wrench w/screw driver (66) and
M5*12 bolt(86).
ATTENTION ： Please make sure the machine is completely assembled before
operation. Before you use the treadmill, please read the instructions carefully.
To Next Page
Loading...
